What you
need to know to order
Order at our online shopping site:

In order to use the Dri Lightning® process to test your liners you must first order a kit. Kits are sold separately and all pieces are available for purchase in case of loss.
There is only one kit so there is no need to worry about
ordering, DLKIT is the part number.
You may need more than one sock set but you can use any sock set with
the kit. Once you have decided
to order, you will have to determine the size of your bucket liner.
Listed below are some of the tools we offer to help you with that
process. When ordering you will
need to know the size of your liner, you can find this either by searching
the truck manufacturer’s listings or by using the attached spreadsheet
(liner cross reference).
Click to truck
information
This will give you a better idea of the bucket you are
using and the size you need for testing.
Once you have identified the truck
manufacturer’s bucket liner number you should cross reference it to the “DL”
Dielectric conductive sock set size and part number.
Please include both on your purchase order to guarantee you receive
the correct pair. Multiple sock
sizes can be ordered with or without ordering a kit.
(You will notice that the part number is the size of the liner.)
Example: DL 42x24x24
this is a square single-man liner
KITS
The Dri Lightning® test kit
contains the following items;
|
1 – Customer DRI LIGHTNING® 15” x
50” Canvas Duffel Bag 1 – Brief carry bag for sock longevity 1 – Operators manual with step by step
instructions and testing log sheet 1 – 20’ long bare copper ground lead wire 1 – Zip bag with 6 pieces of conductive
adhesive mats 12” x 12”
Note:
Bag dated for freshness (Mat adhesive has 1 yr. shelf life) 1 – Utility knife with 20 extra refill blades 1 – Workstation writing pad (clipboard) 1 – Pen 1 – High voltage expander rod hub assembly
with 2 clamps 1 – Arc suppression mat 36” x 36” with
protective carrying canister
(WARNING:
Blanket does not protect against electric shock) 16 – 1/4” x 4’ DRI LIGHTNING®
polythalyne expander rods 16 – 5/8” x 2’ – for 1/4” DRI LIGHTNING® rod
couplings 16 – 3/16” x 4’ DRI LIGHTNING® polythalyne
expander rods 16 – 3/16” x 2’ – for 3/16” DRI LIGHTNING®
rod couplings 1 – Demonstration DVD (if not previously
sent) 1 – Container cleaning wipes |
Bucket Dimensions
Truck Manufactures
(scanned
sheets)
| Altec | Asplundh | Baker |
| Hi-Ranger | Holan | Lift-All |
| McCabe | Pitman | Reach-All |
| RO | TECO | Tele-e-lect |
| Time/Versalift | Various Other Manufacturers | Molded Step |
When ordering conductive sock sets list the most common liner size you will use. Additional pairs of socks can be ordered at any time to be used with any combination of liners you currently test. All conductive sock sets can be used with a single Dri Lightning Kit.
Liner Cross Reference
(spread sheet)
Complete our on-line order form with all necessary information. PLEASE include shipping details and contact information. You can either submit or fax when completed. Complete the form and submit by e:mail (a scanned copy will be accepted), mail or FAX (215) 491-1354 or e:mail to: Drilightning2@verizon.net. You will receive conformation within 48 hours and payment is then due within 7 days.
Additional Ordering
Information
Currently orders can be placed from this site with a
verified pay pal account for any order $1,000.00 or more.
Other ordering methods include over the phone, fax or e:mail.
Payment is requested within 7 days of your acknowledged order.
Your company check should be sent to:
HKH Dielectric, LLC
1464 Easton Rd.
Warrington, PA
18976
As
always, please feel free to contact us with any questions or concerns.
Thank you for considering Dri Lightning®
Products
·
Phone 1-800-730-0525
·
Fax
1-215-491-1354
·
E:mail
drilightning2@verizon.net
Member Since 2009